Basic Info.
Model NO.
ACME-MW6KW
Input Voltage
380V
Connection Mode
Parallel Switching Power Supply
Starting Mode
Self-excited Switching Power Supply
Voltage Regulating Mode
Width Modulation Type
Power Supplying System
Terminal Power Distribution Equipment
Energy Transmission
Two-way Transmission
Modulation System
PWM
Certification
CE, ISO
Brand
Acme
Input
220V/380V
Input Mode
1 Phase 2 Wires/3 Phase 4 Wires
Control Mode
PWM
Power
6kw
Start
Soft Start
Output Frequency
2450MHz
Load Change Rate
0.5%
Efficiency
90%
Duty Cycle
0-50%
DC Output
Pure DC Output
Auto Reverse
Can Be Set Time
External Control
RS485/Modbus/RS232
Working Mode
Cc, Power Limit
Transport Package
Wood Packing
Specification
6kw
Trademark
ACME
Origin
Jinan
HS Code
8504401990
Production Capacity
200PCS/Month
Packaging & Delivery
Package Size
64.00cm * 89.00cm * 78.00cm
Package Gross Weight
98.500kg
Product Description
Product introduction
This product adopts continuous wave magnetron (Panasonic or Richardson) to realize microwave power of 6kW (microwave frequency 2450±15 MHz) microwave generator. The system is cooled by water, mainly composed of high frequency power supply, MW-Head and MW-System. High frequency power supply includes anode high voltage power supply, filament power supply, magnetic power supply and control system, etc. The MW-Head contains magnetron and excitation cavity, etc. The microwave system includes Circulator, Coupler, Three-stub tuner, etc.
The microwave generator has two control modes: touchscreen interface and RS485 communication, can adapt different usage needs. The expansion port is reserved, the control function can be added according to actual usage needs.
This product adopts continuous wave magnetron (Panasonic or Richardson) to realize microwave power of 6kW (microwave frequency 2450±15 MHz) microwave generator. The system is cooled by water, mainly composed of high frequency power supply, MW-Head and MW-System. High frequency power supply includes anode high voltage power supply, filament power supply, magnetic power supply and control system, etc. The MW-Head contains magnetron and excitation cavity, etc. The microwave system includes Circulator, Coupler, Three-stub tuner, etc.
The microwave generator has two control modes: touchscreen interface and RS485 communication, can adapt different usage needs. The expansion port is reserved, the control function can be added according to actual usage needs.
| Num | Item | Technical requirement | Remark |
| 1 | Input voltage | 380V±10%,50Hz±2Hz | Three phase and four wire |
| 2 | Microwave output power | ≥6kW | Continuous wave |
| 3 | Microwave output frequency | 2450MHz±15MHz | |
4 | Microwave conversion efficiency | ≥65% | |
| 5 | MW-Power adjust | 10%~100% continuous adjustment | |
6 | Flange joint | BJ22/BJ26 | |
| 7 | Control mode | Local control/communication | |
8 | Protection | Filament over current and under current; Anode overpressure and overcurrent; Magnetic field overcurrent; Ignition; Magnetron over-temperature; Water protection; reflection protection | |
9 | Volume | HF-Power supply: 482mm*177mm*556mm M-W Head:200mm*250mm*300mm | W*H*D |
10 | Usage environment | Work temperature:-10~40ºC Storage temperature:-20~50ºC Humidity:95%no condensation Altitude:<3000m | <0ºC antifreeze required |
11 | Cooling mode | Water | External supply of equipment, Flow≥2.5L/min |
| Num | Code | Form | Type | Pin | Definition | Characteristic |
1 | XS1 | Terminal block | TD40-01-C | 1 | A | Power supply |
| 2 | B | |||||
| 3 | C | |||||
| 4 | N | |||||
2 | XS2 | Terminal block | 2EDGRKP-5.08/WC-8P | 1 | VCC | +24V |
| 2 | TEMP | Temperature switch signal | ||||
| 3 | FLOW | Flow switch signal | ||||
| 4 | GND | 24VGND | ||||
| 5 | / | / | ||||
| 6 | A1 | PC communication | ||||
| 7 | B1 | |||||
| 8 | RGND | |||||
3 | XS3 | Terminal block | 2EDGRKP-5.08/WC-4P | 1 | VCC | +24V |
| 2 | GND | 24VGND | ||||
| 3 | A2 | Function expansion port | ||||
| 4 | B2 | |||||
4 | XS4 | Terminal block | 2EDGRKP-5.08/WC-2P | 1 | C+ | Magnetic field output+ |
| 2 | C- | Magnetic field output- | ||||
| 5 | X1 | Terminal | JS333(M6 black) | / | HGND | HV-GND |
| 6 | X2 | Stud | M6(butterfly shape) | / | PE | Safety GND |
7 | HV | HV- Conductor | White AEG-15kV-2.5mm² | / | FA | Filament output |
| / | A | Anode HV-Output | ||||
| 8 | IN | Quick screw joint | G1/4-Ø12*8 | / | / | Water inlet |
| 9 | OUT | G1/4 Ø12*8 | / | / | Water outlet |
| Num | Code | Form | Type | Pin | Definition | Characteristic |
1 | HV | High pressure tightness plug | BL-HV15kV | / | FA | Filament output |
BL-HV15kV | / | A | Anode HV-Output | |||
| 2 | X1 | Terminal | JS333(M6 black) | / | HGND | HV-GND |
| 3 | X2 | Stud | M6(butterfly shape) | / | PE | Safety GND |
4 | XS1 | Terminal block | 2EDGRKP-5.08/WC-6P | 1 | VCC | +24V |
2 | TEMP | Temperature switch signal | ||||
3 | FLOW | Flow switch signal | ||||
| 4 | GND | 24VGND | ||||
| 5 | / | / | ||||
| 6 | / | / | ||||
| 5 | IN | Quick screw joint | G1/4-Ø12*8 | / | / | Water inlet |
| 6 | OUT | G1/4 Ø12*8 | / | / | Water outlet | |
7 | / | Flange | BJ26 | / | / | MW-Output |
