- Overview
- Installation Instructions
Basic Info.
Model NO.
YDNV-300
Standard
Standard
Engine Model
Dt22
Rated Voltage
220/380V
Rated Current
540A
Speed
1500/1800rpm
Frequency
50/60Hz
Certificate
CE ISO Saso
Regulator Brand
Madas
Spark Plug Brand
Torch
Alternator
Brushless Alternator
Transport Package
for Open Type, Packing with Plywood Case; for Sile
Specification
Gas generator
Trademark
YDNPOWER
Origin
Weifang China
HS Code
8502200000
Production Capacity
500 Sets /Month
Product Description
| 300kw 375kva Biogas Generator Set | |||
| Genset Model | YDNV-300 | ||
| Rated Power (kW/kVA) | 300/375 | ||
| Rated Current (A) | 540 | ||
| Dimension (mm) | 3420*1700*2100 | ||
| Gross Weight (kg) | 3800 | ||
| Biogas Engine | Brand | VMAN | |
| Model | DT22 | ||
| Configuration | Four-stroke,Water-cooling,Direct Injection,12V-type | ||
| Rated Power (kW/kVA) | 324/405(CH4 no less than 55%) | ||
| Rated Speed (rpm) | 1500 | ||
| Cylinder No. | 12.V | ||
| Bore*Stroke (mm) | 128×142 | ||
| Cooling Method | Water cooling | ||
| Oil Consumption (g/kw.h) | 1 | ||
| Gas Consumption (m3/h) | ≤180@100Load | ||
| Starting method | 24V DC | ||
| Gas control system | E-Throttle | BOSCH®(German Brand) | |
| MIXER | IMPCO®(USA Brand) | ||
| Regulator | MADAS®(Italian Brand) | ||
| Spark plug | TORCH®(China Brand) | ||
| Water temperature | BOSCH®(German Brand) | ||
| Alternator | Brand | FARRAND | |
| Model | FLD-300 | ||
| Rated Power (kW/kVA) | 300/375 | ||
| Material | High performance 100% copper | ||
| Efficiency | 94.50% | ||
| Voltage Regulation | <=±1 | ||
| Voltage Regulation | Brushles, Self Excitation | ||
| Insulation Class | H | ||
| Control System | Brand | SMARTGEN | |
| Model | HGM6110N | ||
| Working Voltage | DC8.0V to DC35.0V, continuous | ||
| Overall Dimensions (mm) | 197*152*47 | ||
| Panel Cutout (mm) | 186*141 | ||
| Working Condition | Temperature: (-25~70)ºC; Humidity: (20~90)% | ||
| Weight | 0.56kg | ||
Requirments for Biogas
Requirments for Biogas 1.Methane should be at least 55%
2.The biogas temperature should be between 0-60 ºC
3. No inpurity should be in the gas. Water in the gas should be less than 20g/Nm3.
4. Heat value should be at least 5500kcal/m3, if less than this value, the power of the engine will be declined.
5. Gas pressure should be 8-14KPa, if the pressure is less than 3KPa, booster fan is necessary.
6.The gas should be dehydrated and desulfurated. Make sure that there is no liquid in the gas. H2S<200mg/Nm3
2.The biogas temperature should be between 0-60 ºC
3. No inpurity should be in the gas. Water in the gas should be less than 20g/Nm3.
4. Heat value should be at least 5500kcal/m3, if less than this value, the power of the engine will be declined.
5. Gas pressure should be 8-14KPa, if the pressure is less than 3KPa, booster fan is necessary.
6.The gas should be dehydrated and desulfurated. Make sure that there is no liquid in the gas. H2S<200mg/Nm3